Behavioral portfolio selection with loss control

In this paper we formulate a continuous-time behavioral (à la cumulative prospect theory) portfolio selection model where the losses are constrained by a pre-specified upper bound. Economically the model is motivated by the previously proved fact that the losses occurring in a bad state of the world can be catastrophic for an unconstrained model. Mathematically solving the model boils down to solving a concave Choquet minimization problem with an additional upper bound. We derive the optimal solution explicitly for such a loss control model. The optimal terminal wealth profile is in general characterized by three pieces: the agent has gains in the good states of the world, gets a moderate, endogenously constant loss in the intermediate states, and suffers the maximal loss (which is the given bound for losses) in the bad states. Examples are given to illustrate the general results.     

Effect of C60 ion sputtering on the compositional depth profiling in XPS for Li(Ni,Co,Mn)O2 electrodes

The performance of a Li-ion cell strongly depends on the solid-electrolyte interface (SEI) on electrodes. The depth distribution of composition in SEI is normally determined by means of X-ray Photoelectron Spectroscopy (XPS) via Ar ion sputtering. Recently, a new kind of ion gun using C60 ions as sputtering source was introduced. In this report, a comparison between the effects of these two kinds of ion guns on the quantification of Li(Ni,Co,Mn)O₂ electrodes was made. It was found that the C60 ion gun is more suitable for analyzing the composition and chemical state of Li(Ni,Co,Mn)O₂ electrode since that it causes lower chemical damage in the superficial layer.     

(Ti,Al,Si,C)N nanocomposite coatings synthesized by plasma-enhanced magnetron sputtering

Materials’ surface service property could be enhanced by transition metal nitride hard coatings due to their high hardness, wear and high temperature oxidation resistance, but the higher friction coefficient (0.4-0.9) of which aroused terrible abrasion. In this work, quinternary (Ti,Al,Si,C)N hard coating 3-4 μm was synthesized at 300 °C using plasma enhanced magnetron sputtering system. It was found that the coating's columnar crystals structure was restrained obviously with the increase of C content and a non-columnar crystals growth mode was indicated at the C content of 33.5 at.%. Both the XRD and TEM showed that the (Ti,Al,Si,C)N hard coatings had unique nanocomposite structures composed of nanocrystalline and amorphous nc-(Ti,Al)(C,N)/nc-AlN/a-Si₃N₄/a-Si/a-C. However, the coatings were still super hard with the highest hardness of 41 GPa in spite of the carbon incorporation. That a-C could facilitate the graphitization process during the friction process which could improve the coating's tribological performance. Therefore, that nanocomposite (Ti,Al,Si,C)N coatings with higher hardness (>36 GPa) and a lower friction coefficient (<0.2) could be synthesized and enhance the tribological performance and surface properties profoundly.     

Structural, optical and electrical properties of Zn1−xCdxO thin films prepared by PLD

Ternary polycrystalline Zn_1−xCd_xO semiconductor films with cadmium content x ranging from 0 to 0.23 were obtained on quartz substrate by pulse laser deposited (PLD) technique. X-ray diffraction measurement revealed that all the films were single phase of wurtzite structure grown on c-axis orientation with its c-axis lattice constant increasing as the Cd content x increasing. Atomic force microscopy observation revealed that the grain size of Zn_1−xCd_xO films decreases continuously as the Cd content x increases. Both photoluminescence and optical measurements showed that the band gap decreases from 3.27 to 2.78 eV with increasing the Cd content x. The increase in Cd content x also leads to the broadening of the emission peak. The resistivity of Zn_1−xCd_xO films decreases evidently for higher values of Cd content x. The shift of PL emission to visible light as well as the decrease of resistivity makes the Zn_1−xCd_xO films potential candidate for optoelectronic device.     

Modifications in silver-doped silicate glasses induced by ns laser beams

Glass layers for planar light waveguides prepared by Ag-Na ion exchange of different silicate glasses in molten salt baths are annealed and/or irradiated with a laser beam in the UV region, with different energy density values and total pulse numbers. The samples are mainly characterized by optical absorption spectroscopy, luminescence spectroscopy, and Rutherford backscattering spectrometry, in order to determine the role of irradiation parameters and of the host matrix structure in the aggregation phenomena. Photoluminescence spectroscopy gave information regarding the presence of Ag multimeric aggregates, the primal seeds for the growing (nano)crystals. The appearance of the plasmon resonance band in the optical absorption spectra proved the formation of Ag clusters and allowed the evolution steps of the clusterization process to be followed as a function of the energy deposited during the laser irradiation.     

Surface-enhanced Raman scattering (SERS) activity of Ag, Au and Cu nanoclusters on TiO2-nanotubes/Ti substrate

Tubular arrays of TiO₂ nanotubes (ranging in diameter from 40 to 110 nm) on a Ti substrate were used as a support for Ag, Au or Cu deposits obtained by the sputter deposition technique, where the amount of metal varied from 0.01 to 0.2 mg/cm². Those composite supports were intended for surface-enhanced Raman scattering (SERS) investigations. Composite samples were studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) to reveal their characteristic morphological and chemical features. Raman spectra of pyridine (as a probe molecule) were measured at different cathodic potentials ranging from −0.2 down to −1.2 V after the pyridine had been adsorbed on the metal-covered TiO₂ nanotube/Ti substrates. In addition, SERS spectra on a bulk standard activated Ag, Au and Cu substrates were also measured. The SERS activity of the composite samples was strongly dependent on the amount of metal deposit, e.g. at and above 0.06 mg Ag/cm², the intensity of SERS signal was even higher than that for the Ag reference substrate. The high activity of these composites is mainly a result of their specific morphology. The high SERS sensitivity on the surface morphology of the substrate made it possible to monitor very small temporal changes in the Ag metal clusters. This rearrangement was not detectable with microscopic (SEM) or microanalytical (AES) methods. The SERS activity of Au or Cu clusters was distinctly lower than those of Ag. The spectral differences exhibited by the three kinds of composites as compared to the reference metal samples are discussed.     

线电荷与接地半无限大导体板所形成的电场

将镜像法和保角变换法相结合,计算由线电荷与接地半无限大导体板所形成的电场,给出其电势分布和场强分布,进一步得出等势线方程和电场线方程,并利用数学软件MATLAB绘制出等势线图和电场线图.     

固相反应法制备的Gd0.7Sr0.3MnO3粉末的磁学特性

利用固相反应法制备了用Sr部分替换GdMnO3中Gd的锰基钙钛矿氧化物Gd0.7Sr0.3MnO3.X射线衍射表明其晶体结构为正交晶系,空间群为Pnma.通过测量样品在零场冷却和加场冷却下的磁化强度及磁化率随温度的变化曲线,得出样品显示亚铁磁特性,Mn和Gd两个子晶格相互反平行.根据居里-外斯定律得知其居里温度为61 ...     

烧结温度、La掺杂对Bi_(1-x)La_xMnO_3结构及磁性能的影响

用溶胶-凝胶(so-lgel)法制备了多铁Bi1-xLaxMnO3(BLMO,0.1≤x≤0.4)系列样品.样品的结构表征(X-射线衍射,扫描电子显微镜)及差热-热重(TG-DTA)分析测量显示,形成稳定的BLMO钙钛矿相的烧结温度位于900~950℃.La掺杂对BLMO样品(950℃烧结)的结构和磁性能的影响也被仔细研究.结果显示,随着La掺杂减少,样品中BLMO钙钛矿相减弱,铁磁转变温度(TC)由53K降至41K,而饱和磁化强度经历了先降低再升高的变化.这可归因于La含量较少的样品中Bi空位浓度的增加诱导了Mn-O-Mn键角的减小和局域Mn4+离子的增多,使得Mn3+和Mn4+离子的铁磁超交换增强和Mn3+离子的dz2轨道有序受到局域破坏.     

交叉分子束研究氯原子与硅烷的反应动力学

利用通用型交叉分子束研究了氯原子与硅烷的反应,观测到SiH₃Cl+H通道. 测量到产物SiH₃Cl在实验坐标下的角度分辨的飞行时间谱,获得了这个通道质心坐标下的产物角分布和动能分布. 结果表明,相对于氯原子束方向,产物SiH₃Cl主要是后向散射,说明这个通道主要是通过典型的双分子亲核取代反应(S_N2)机理进行的.